Alp Caner – Sismik İzolasyon Sistemleri ve AR-GE Çalışmaları
Bruno Briseghella – Ankara 06-03-2015_R1
Camillo Nuti – Seismic Isolation and Dissipation solutions for seismic protection
Mehmet ATASOY – KARE MUH SISMIK IZOLATORLU HASTANELER SUNUM
Ayşe BOZYEL – izolator sunum
Cenan ÖZKAYA – ISSUES RELATED TO DESIGN OF SEISMICALLY ISOLATED HIGHSPEED
Yakut, A. and Yura, J.A., Parameters Influencing Performance of Elastomeric Bearings at Low Temperatures. “Journal of Structural Engineering-ASCE”, 128, (2002), p.986-994.
Yakut, A. and Yura, J.A., Evaluation of Elastomeric Bearing Performance at Low Temperatures. “Journal of Structural Engineering-ASCE”, 128, (2002), p.995-1002.
C. Ozkaya, U. Akyuz, A. Caner, M. Dicleli, and S. Pınarbasi, Development of a new rubber seismic isolator ‘Ball Rubber Bearing’. “Earthquake Engineering and Structural Dynamics”, 40, (2011), p.1337-1352
Gökhan Özdemir, Uğurhan Akyüz, Dynamic Analyses of Isolated Structures under Bi-directional Excitations of Near-field Ground Motions. “Shock and Vibration”, 19, (2012), p.19, 505-513.
A Karimzadeh Naghshineh, U Akyüz, A Caner, Comparison of fundamental properties of new types of fiber-mesh-reinforced seismicisolattors with conventional isolators, Earthquake Engineering & Structural Dynamics 43 (2), 301-316
Yakut, A. and Yura, J.A., Parameters Influencing Performance of Elastomeric Bearings at Low Temperatures. “Journal of Structural Engineering-ASCE”, 128, (2002), p.986-994.
Emrah Erduran and Ahmet Yakut, Drift based damage functions for reinforced concrete columns.”Computers and Structures”, 82, (2004), p.121-130.
Ahmet Yakut, Preliminary seismic performance assessment procedure for existing RC buildings.”Engineering Structures”, 26, (2004), p.1447-1461.
Sinan Akkar, Haluk Sucuoglu and Ahmet Yakut, Displacement-Based Fragility Functions for Low- and Mid-rise Ordinary Concrete Buildings. “Earthquake Spectra”, 21, (2005), p.901-927.
B. Sadık Bakır, M. Tolga Yılmaz, Ahmet Yakut and Polat Gülkan, Re-examination of damage distribution in Adapazarı: Geotechnical considerations. “Engineering Structures”, 27, (2005), p.1002-1013.
Ahmet Yakut,Polat Gülkan, B.Sadık Bakır and M.Tolga Yılmaz, Re-examination of damage distribution in Adapazarı: Structural considerations. “Engineering Structures”, 27, (2005), p.990-1001.
Ahmet Yakut, Guney Ozcebe and M. Semih Yucemen, Seismic vulnerability assessment using regional empirical data. “Earthquake Engineering And Structural Dynamics”, 35, (2006), p.1187-1202.
Ilker Kazaz, Ahmet Yakut, Polat Gulkan, Numerical simulation of dynamic shear wall tests: A benchmark study. “Computers and Structures “, 84, (2006), p.549-562.
İlker Kazaz, Ahmet Yakut , Polat Gülkan, Seismic response assessment of a stiff structure. “Earthquake Engineering and Structural Dynamics”, 35, (2006), p.737-759.
0.
Emrah Erduran, Ahmet Yakut, Component damage functions for reinforced concrete frame structures. “Engineering Structures”, 29, (2007), p.2242-2253.
Emrah Erduran, Ahmet Yakut, Vulnerability Assessment of Reinforced Concrete Moment Resisting Frame Buildings. “ASCE, Journal of Structural Engineering”, 133, (2007), p.576-586.
Haluk Sucuoglu, Ufuk Yazgan, Ahmet Yakut, A Screening Procedure for Seismic Risk Assessment in Urban Building Stocks. “Earthquake Spectra”, 23, (2007), p.441-458.
Ahmet Yakut, Capacity Related Properties of RC Frame Buildings in Turkey. “Journal of Earthquake Engineering”, 12, (2008), p.265-272.
Ahmet Yakut and Hazım Yılmaz, Correlation of Deformation Demands with Ground Motion Intensity. “Journal of Structural Engineering-ASCE”, 134, (2008), p.1818-1828
Alp Caner, Melih Yanmaz, Ahmet Yakut, Ozgur Avsar, Taner Yilmaz, Service Life Assessment of Existing Highway Bridges with No Planned Regular Inspections. “Journal of Performance of Constructed Facilities”, 22, (2008), p.108-114.
Koray Kadas, Ahmet Yakut, İlker Kazaz, Spectral Ground Motion Intensity Based on Capacity and Period Elongation. “JOURNAL OF STRUCTURAL ENGINEERING-ASCE”, 137, (2011), p.401-409.
Ozgur Avsar, Ahmet YAkut, Alp Caner, Analytical Fragility Curves for Ordinary Highway Bridges in Turkey. “Earthquake Spectra”, 27, (2011), p.971-996.
İlker Kazaz, Polat Gülkan, and Ahmet Yakut, Deformation limits for structural walls with confined boundaries. “Earthquake Spectra”, 28, (2012), p.1019-1046.
Ö. Avşar and A. Yakut, Seismic vulnerability assessment criteria for RC ordinary highway bridges in Turkey. “Structural Engineering and Mechanics”, 43, (2012), p.127-145.
Ilker Kazaz, Polat Gülkan, Ahmet Yakut, Performance limits for structural walls: An analytical perspective. “Engineering Structures “, 43, (2012), p.105-119.
Ilker Kazaz, Polat Gülkan, Ahmet Yakut, Performance limits for structural walls: An analytical perspective. “Engineering Structures “, 43, (2012), p.105-119.
Ahmet Yakut, Halûk Sucuoğlu and Sinan Akkar, Seismic risk prioritization of residential buildings in Istanbul. “EARTHQUAKE ENGINEERING AND STRUCTURAL DYNAMICS”, 41, (2012), p.1533-1547.
Akyüz,U. and Ertepınar, A., Breathing Motions and Loss of Stability of Pre-Stressed Compressible Hyperelastic Cylindrical Shells. “Int. Journal of Engineering Science “, 35 , (1997), p.1265-1275
Chen, J., Akyuz, U., Xu, L. and Pidaparti, R., Stress Analysis of the Human Temporomandibular Joint. “Medical Engineering and Physics “, 20 , (1998), p.565-572 .
Akyüz, U. and Ertepınar, A., Stability and Asymmetric Vibrations of Pressurized Compressible Hyperelastic Cylindrical Shells. “International Journal of Non-Linear Mechanics”, 34, (1999), p.391-404.
Pidaparti, R.M., Akyüz, U., Noick, P.A. and Burr, D.B., Fatigue Data Analysis of Canine Femurs under Four-Point Bending. “Biomedical Materials and Engineering”, 10, (2000), p.43-50.•Akyüz, U. and Ertepınar, A., Stability and Breathing Motions of Pressurized Compressible Hyperelastic Spherical Shells. “Journal of Sound and Vibration”, 247, (2001), p.293-304.
U. Akyuz, Separation at the Interface of Nonlinearly Elastic Spinning Tube-Rigid Shaft Subjected to Circumferential Shear. “International Journal of Non-Linear Mechanics”, 39, (2004), p.1333-1341.
Erdem, U. Akyuz, U. Ersoy and G. Ozcebe, An experimental study on two different strengthening techniques for RC frames. “Engineering Structures”, 28, (2006), p.1843-1851.
S. Pinarbasi, U. Akyuz, and Y. Mengi, A New Formulation for the Analysis of Elastic Layers Bonded to Rigid Surfaces. “International Journal Solids and Structures”, 43, (2006), p.4271-4296.
Celal Soyarslan, Erman Tekkaya, Ugurhan Akyuz, Application of Continuum Damage Mechanics in discontinuous crack formation: Forward extrusion chevron predictions. “Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik”, 88, (2008), p.436-453.
Y.D. A. Erdem, A. Turer, B. Erdil, U. Akyuz, and N.S. Guchan, Testing and Seismic Capacity Evaluation of a Typical Traditional Ottoman Timber Frame. “Advanced Materials Research”, 133-134, (2010), p.629-634.
Ibrahim Erdem and Ugurhan Akyuz, Analytical Investigation of Lateral Stregth of Masonry Iinfilled RC Frames Retrofitted with CFRP. “Journal of Performance of Constructed Facilities”, 24, (2010), p.302-310.
Barış Erdil, Uğurhan Akyuz, İsmail Özgür Yaman, Mechanical Behavior of CFRP Confined Low and Medium Strength ConcreteSubjected to Simultaneous Heating-Cooling Cycles and Sustained Loading. “Materials and Structures”, 45, (2012), p.223-233
Erdil, U. Akyuz, and I.O. Yaman, CFRP-Confined Concrete Columns Under Different Environmental Effects. “Magazine of Concrete Research”, 65, (2013), p.731-743.
Caner, A., Zlatanic, S. and Munfah, N., Structural Fire Performance of Concrete and Shotcrete Tunnel Liners. “Journal of Structural Engineering”, 131, (2005), p.1920-1925.130.
Yanmaz, A. M., Berk, A, and Caner A., Development of a safety-inspection methodology for river bridges. “Journal of Performance of Constructed Facilities, ASCE”, 21, (2007), p.382-389.
Caner, A., Yanmaz, A. M., Yakut, A. Avsar, O. and Yılmaz, T., Service life assessment of existing highway bridges with no planned regular inspections. “ASCE Journal of Performance of Constructed Facilities”, 22, (2008), p.108-114.
Alp Caner , Altan Böncü, Structural Fire Safety of Circular Concrete Railroad Tunnel Linings. “Journal of Structural Engineering”, 135, (2009), p.1081 – 1092.
Ali Karakaplan, Alp Caner, Özgür Kurç, Arman Domaniç, Andaç Lüleç, Yapı Çözümlemesinde Yeni Bir Devir: Yapım Aşaması/ A New Era in Structural Analysis: Construction Staging. “Teknik Dergi”, 20, (2009), p.4905 – 4917.
.
Gizem Sevgili , Alp Caner, Improved Seismic Response of Multisimple-Span Skewed Bridges Retrofitted with Link Slabs. “Journal of Bridge Engineering”, 14, (2009), p.452-459.
Avsar, O., Marianos W. N. and Caner A., Identifying Bridge Rehabilitation Needs Using an Analytical Method Developed for Interpretation of Visual Inspection Data. “Journal of Performance of Constructed Facilities”, , (2011),
Taner Yılmaz and Alp Caner, Target damage level assessment for seismic performance evaluation of two-column reinforced concrete bridge bents. “Bridge Structures – Assessment, Design & Construction”, 8, (2012), p.135-146.
Avsar, Ozgur; Marianos, Ward Nicholas, Jr.; Caner, Alp, Identifying Bridge Rehabilitation Needs Using an Analytical Method Developed for Interpretation of Visual Inspection Data. “JOURNAL OF PERFORMANCE OF CONSTRUCTED FACILITIES”, 26, (2012), p.312-319.
Yucemen, Calibration of Turkish LRFD bridge design code for slab on steel plate girders. “Bridge Structures”, 9, (2013), p.115-121
Türkçe
English